C*Pix SDC2000 Provozní pokyny stáhnout pdf (Strana 44)

SDC 2002

3. Operational Preparations

3-28

Operating Instructions - Rev. 1 / 6.2003

3.6.6. THREAD FILM CORRECTLY

FILM

THREAD DIRECTION

S8 mm film (option S8 scanning req.) Put perforation to the film deck plate

16mm film Put perforation to the film deck plate

35mm film Put audio track to the film deck plate

3.6.6.1. Film roll with bobbin o p e r a t i o n

Slide the full film roll, as shown below, onto the left winding plate and lead the film on

film path ”A” (printed on the film deck plate) to the right winding plate.

Insert the film leader into the slot of the winding body and give the winding plate a

few turns counterclockwise.

3.6.6.2. F i l m r e e l o p e r a t i o n

Slide the full film reel onto the left reel spindle and lead the film on film path ”A” to the

right (empty) film reel.

Insert the film leader into the slot of the film reel and give the reel a few turns coun-

terclockwise.

Door magnet !

Fig. 333: Film threading path

Note! When threading the film into the film guiding edges of the optical block make sure

that the film properly fits to the edges and that there are no emulsion deposits at

the film guiding edges (for cleaning see section 6.2.1.).

Attention! When threading films with a magnetic sound track never touch the door

magnet of the front doors (danger of erasing)!

3.6.6.3. Switch to standby

Subsequently press key STANDBY on the Local Control Panel of the film scanner

(film is tightened).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 365 366

Žádné komentáře

C*Pix SDC2000 Provozní pokyny Strana 44