
SDC 2002
4.3. TK Config Menu
4-50
Operating Instructions - Rev. 1 / 6.2003
Adjust peak white (maximum density D
max
on NEG film) of the G-channel
to 554 mV at wave form monitor just below clipping with “Green Gain” control.
Fig. 421: Film menu, matching lift & gain
Adjust “Green Lift” (black) control of the G- channels to 14mV at the WFM.
Repeat Gain and Lift adjustments of the G-channel until the levels for reference
white and black is reached.
Adjust the “Red & Blue Lift” (black) ” controls for R- and B-channels to the
control value of the G-channel.
Adjust the black levels for R- and B-channels with “Matching Gain” to 14
mV.
If the peak white level in one channel should be clipped, please take this chan-
nel as a reference for the first “matching lift (black)” and “matching gain” adjust-
ment instead of the G-channel.
Note!
c) In DXR-G mode, the CRT gamma is not selectable, because CRT gamma
is replaced by the DXR-G transfer characteristic.
Set
Reference White
G-Channel
Set
Reference Black
G-Channel
Set R & B
Lift Controls
Set
Reference Black
& White
R- & B-Channel
Komentáře k této Příručce