C*Pix SDC2000 Provozní pokyny stáhnout pdf (Strana 176)

100

101

SDC 2002

4.3. TK Config Menu

4-90

Operating Instructions - Rev. 1 / 6.2003

4. Set Count and Offset of the reference frame from step 1

Submenu “Timecode” / window “Learn Head Offset”.

Set both with the numeric keyline.

Fig. 447: Submenu “Timecode“ with window “Key Code” setup

5. Press “Start“ to execute the learn mode

While the SDC 2001 is in the “learn mode”, softkey “Start“ is activated.

Using “Stop” aborts the “learn mode”.

6. Rewind a short piece of film

Select PLAY mode and transfer the scene which includes the reference frame.

Take care, that at least one keycode is read during this transfer.

If the SDC 2001 has learned the head offset successfully, learn mode softkey

“Stop“ is activated again.

If an error occurs during this procedure, a warning message will be displayed.

Then you have to retry the head offset learning procedure.

7. Check the keycode

Play a short piece of film and take care that any keycode is read on the reader

device and compare the keycode of the currently scanned frame with the dis-

played code (count & offset) in submenu “Timecode”.

Field Keycode:

Count: FIlm length in feet

Offset: Frame offset

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 365 366

Komentáře k této Příručce

Žádné komentáře

C*Pix SDC2000 Provozní pokyny Strana 176

Komentáře k této Příručce

Související produkty a manuály pro Bridge kamery C*Pix SDC2000