C*Pix SDC2000 Provozní pokyny Strana 252

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 366
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 251
4.8 Audio Menu SDC 2002
4-166
Operating Instructions - Rev. 1 / 6.2003
5. Lowpass filter selection
6. A/D convert synchronization
7. Pre-emphasis selection
8. Channel mode (mono or stereo)
9. Audio delay selection
10. Test tone 1 / 10 KHz Generator
11. D/A conversion
12. Display of the Audio Outputs (symbolized output sockets)
Two analog and one digital (AES/EBU) outputs.
Details of Function Buttons, Controls & Displays
A Config
1.
Menu button “A Config”
opens dialog “Audio Configuration”
2. Source
“Channel 1 / 2 source” selection
Click on this section to open the Source selection window.
There you will find a Source Selection key for each channel.
Click on these keys and make your choice from the drop down menu.
The selections for Channels 1 and 2 are different:
Channel 1 can be switched to Off, Magnetical (only for 16mm films), Optical,
Ext 1 and Test Tone;
Channel 2 can be switched to Off, Optical, Ext 2 and Test Tone.The current
settings are shown on the key display.
”Off” Optional muting of an audio channel that is not needed.
”Magnetical” Selection of magnetical audio for 16mm films.
”Optical” Selection optical audio for 16mm and 35mm films.
”External 1” Selection of an external audio source via socket EXT. 1 IN.
“Test” Internally, digitally produced sine wave tone
(1 kHz/10 kHz, 0 VU) for test purposes.
Audio Scanner 1 - COMMAG 16 - can be released
disable Audio Scanner will be lifted up, audio track will not be scanned
enable Audio Scanner 1 will be released, ready for operation
Zobrazit stránku 251
1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 365 366

Komentáře k této Příručce

Žádné komentáře