C*Pix SDC2000 Provozní pokyny Strana 212

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 366
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 211
4.5 Color Menu SDC 2002
4-126
Operating Instructions - Rev. 1 / 6.2003
Finally adjust the white level of the saw_14 signal with the White controls to the
desired value.
White RGB range 0% - 200%
White Master range 0% - 1000%
MASTER White 0 - 1000%
RGB White 0 - 100%
Fig. 418:
4.5.7 Adjustment of the Unity Values in the “Extended Range” Mode
For the “normal mode” and UNITY for all color corrections, you will see a straight
sawtooth line on the waveform monitor.
When switching color corrections between “normal” to “extended range” mode the
previous settings are not scaled to the other control range and the look of the image
changes!
If the neutral position of “extended mode” is not yet stored on your external telecine
controller, it can be found by the following procedure:
1. Select the 100% sawtooth test signal
Menu Color, Col Set - select Pattern - sawtooth 0-100%
2. Press Test button
Fig. 419:
White
adjustment
Zobrazit stránku 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 365 366

Komentáře k této Příručce

Žádné komentáře