C*Pix SDC2000 Manuál s instrukcemi stáhnout pdf (Strana 75)

Ignite SDC/HDC Robotic Camera Instruction Manual 75

Menu Selections

Initial Settings

In case of the wrong setting in any use mode, take the following steps to

return to the initial settings.

1. Select [Initialize Data] on the main menu screen of each Use Mode.

Press the YES/ABC switch, then the [Initialize Data] screen (Figure 47)

shows for about 10 seconds.

Figure 47. initialize Data Screen

2. Press the YES/ABC switch within about 10 seconds to return to the

initial settings (Table 30 and Table 31), the existing settings are

initialized (Figure 48), and the camera returns to main menu.

Figure 48. Data Initialized Screen

3. If the NO/BAR switch is pressed, or if the YES/ABC switch is not

pressed, within about 10 seconds (Figure 49), and the camera returns to

main menu, then the existing settings are not initialized.

Aspect Ratio

Aspect ratio can be selected from 16:9 or 4:3.

Fan SW

OFF: Select this setting to stop the fan when its operating sound is found to

be bothersome in a studio or other such environment.

Auto: The temperature is detected automatically, and the fan starts operat-

ing when the temperature exceeds approx. 95 ºF (35 ºC)

Table 29. Other Settings

Selection

Description

8492_39_r0

8492_40_r0

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 121 122

Žádné komentáře

C*Pix SDC2000 Manuál s instrukcemi Strana 75